The ChannelAdam Test Framework Libraries

IMPORTANT: DEPRECATION NOTICE

This documention is for Version 1 of these full .NET Framework libraries and it has been deprecated.

Please see the [Version 2] documentation for the following ChannelAdam .NET Standard libraries.

Overview

The open source ChannelAdam Test Framework Libraries are a set of automated testing libraries to make testing your .NET code easier.

There are currently 3 main libraries:

  • The ChannelAdam Test Framework - the common test framework library without a dependency on any other test runner or library
  • The ChannelAdam Test Framework for MSTest - containing MSTest-specific implementations of interfaces in the common library
  • The ChannelAdam Test Framework for BizTalk - containing functionality specifically for testing Microsoft BizTalk artifacts.

The ChannelAdam Test Framework Libraries are fully compatible with MSTest and .NET Framework 4.0 and above.

Note: I highly recommend using these libraries with Behaviour-Driven Development practices and the usage of SpecFlow.

Getting Started

NuGet Package Installation

The easiest way to get started is to install the library that suits your favourite test runner or test library. Currently however there is only the MSTest implementation…

To install the ChannelAdam.TestFramework.MSTest NuGet package run the following command in the Package Manager Console:

1PM> Install-Package ChannelAdam.TestFramework.MSTest

Features

Logger

Logging useful information to the output of a test is extremely important.

The ISimpleLogger interface in the ChannelAdam Core Library provides a very simple interface with a simple Log method that is intended for usage in scenarios such writing test output.

The SimpleConsoleLogger class implements ISimpleLogger and is a thin wrapper around Console.WriteLine().

Log and then Assert

I cannot emphasise enough how important it is to log useful to the output of a test. Developers and analysts almost should be able to read the output of a test like a story. Analysts especially should review the test outputs and be satisfied that the test was implemented correctly - almost as if they performed the test themselves. Therefore, when an assertion is performed, we want the test output to actually tell us that an assertion is taking place and provide a information about what is being asserted.

The Log Asserter interface provides all the usual assertion methods that you are familiar with, and the first parameter of all of the methods is a string that will be outputted to an ISimpleLogger (provided in the constructor) before performing the actual assertion.

This LogAssert class is the MSTest implementation of the Log Asserter interface.

Test Easy Base Class for Tests

Logging, assertions and testing for exceptions are 3 of some fundamental features common to most automated test suites. Wouldn’t it be nice to be able to perform that functionality easily and keep your test code to a minimum?

The TestEasy base class for tests provides those abilities.

This class provides the following helpful properties.

  • ISimpleLogger Logger - for logging to the test output

  • ILogAsserter LogAssert - your handy-dandy log asserter

  • ExpectedExceptionDescriptor ExpectedException - describes the exception that is expected to occur for a specific test case

  • Exception ActualException - for storing the actual exception that occurred

When the ActualException property is set, the details are automatically logged to the test output.

TestEasy also contains the following helpful methods:

  • void Try(Action action) - performs the given action and catches exceptions into ActualException

  • void Try(Func<Task> action) - performs the given asynchronous action that returns a Task, waits for it finish, and catches exceptions into ActualException

  • void AssertNoExceptionOccurred() - asserts that no ActualException exists/occurred

  • void AssertExpectedException(Type expectedExceptionType) - asserts that type of the value of ActualException is the given expected type

  • void AssertExpectedException() - asserts that the ActualException is equivalent to that described by the ExpectedException descriptor. When the ActualException is an System.AggregateException, the assertion will pass if there is at least one inner exception equivalent to the ExpectedException descriptor.

Expected Exception Descriptor

The ExpectedException property is implemented by the ExpectedExceptionDescriptor class. This class describes the exception that is expected to occur.

There are 2 properties in ExpectedExceptionDescriptor that are specifically used in the AssertExpectedException() method:

  • string MessageShouldContainText - which describes the substring that the ActualException.Message property should contain

  • Type ExpectedType - which describes the System.Type that ActualException should be.

Either or both of these properties can be set. When set, the details are automatically logged to the test output.

Moq Test Fixture Base Class for Tests

MoqTestFixture inherits all the goodies from TestEasy and also provides a MyMockRepositoy property to access the Moq MockRepository.

The default constructor automatically creates a Moq “loose” MockRepository, but that can be specified in an overload of the constructor.

Text Tester

The TextTester class is used in tests for asserting whether actual text is similar enough to the given expected text.

Under the covers, it uses the DiffPlex open source library to identify differences.

The TextTester class has the following properties:

  • string ActualText

  • string ExpectedText

  • DiffPaneModel Differences

  • Action<DiffPaneModel> TextDifferenceFilter - a filter for the diff (see below)

And the following methods:

  • void ArrangeActualText(Assembly assembly, string resourceName) - to arrange the actual text from an embedded resource in the given assembly

  • void ArrangeActualText(string text) - to arrange the actual text from the given string

  • void ArrangeExpectedText(Assembly assembly, string resourceName) - to arrange the expected text from an embedded resource in the given assembly

  • void ArrangeExpectedText(string text) - to arrange the expected text from the given string

  • virtual void AssertActualTextEqualsExpectedText() - to assert the actual text against the expected text

  • bool IsEqual() - determines if the given actual and expected text is equivalent

  • virtual bool IsEqual(string expected, string actual) - determines if the given actual and expected text is equivalent

Filtering Text Differences

The TextTester class provides 3 mechanisms for hooking into the DiffPlex DiffPaneModel difference result, allowing you to manipulate it before a final decision is made as
to whether or not the actual text is similar enough to the expected text.

  • An event that is raised with the differences
1    /// <summary>
2    /// Occurs when a text difference is detected, allowing a listener to filter the differences and
3    /// change the Line[x].Type to ChangeType.UnChanged so that the difference is no longer treated as a difference.
4    /// </summary>
5    /// <remarks>
6    /// This event or the TextDifferenceFilter property can be used for this purpose.
7    /// </remarks>
8    public event EventHandler<TextDifferenceDetectedEventArgs> TextDifferenceDetectedEvent;
  • An action delegate method that is called with the differences
1    /// <summary>
2    /// Gets or sets the Action delegate to be invoked when a text difference is detected, allowing differences to be filtered out by
3    /// changing the Line[x].Type to ChangeType.UnChanged - so that a difference is no longer treated as a difference.
4    /// </summary>
5    /// <value>The Action delegate.</value>
6    /// <remarks>
7    /// This property or TextDifferenceDetectedEvent can be used for this purpose.
8    /// </remarks>
9    public Action<DiffPaneModel> TextDifferenceFilter { get; set; }
  • A virtual method that allows you to inherit from the tester class and override the differences when they are detected.
1    protected virtual void OnTextDifferenceDetected(DiffPaneModel differences)

For a quick example, please see the Behaviour Specification for the TextTester class and the associated
text tester code

XML Tester

The XmlTester class is used in tests for asserting whether the actual XML is similar enough to the given expected XML.

Under the covers, it uses the XMLUnit.NET open source library to identify differences.

The XMLTester class has the following properties:

  • XElement ActualXml

  • XElement ExpectedXml

  • Diff Differences

And the following methods:

  • void ArrangeActualXml(Assembly assembly, string resourceName) - to arrange the actual XML from an embedded resource in the given assembly

  • void ArrangeActualXml(XElement xmlElement) - to arrange the actual XML from a given XElement

  • void ArrangeActualXml(object valueToSerialise) - to arrange the actual XML by serialising the given object

  • void ArrangeActualXml(object valueToSerialise, XmlRootAttribute xmlRootAttribute) - to arrange the actual XML by serialising the given object and applying the given XmlRootAttribute during the serialisation

  • void ArrangeActualXml(object valueToSerialise, XmlAttributeOverrides xmlAttributeOverrides) - to arrange the actual XML by serialising the given object and applying the given XmlAttributeOverrides during the serialisation

  • void ArrangeActualXml(string xmlValue) - to arrange the actual XML from the given XML string

  • void ArrangeExpectedXml(Assembly assembly, string resourceName) - to arrange the expected XML from an embedded resource in the given assembly

  • void ArrangeExpectedXml(XElement xmlElement) - to arrange the expected XML from a given XElement

  • void ArrangeExpectedXml(object valueToSerialise) - to arrange the expected XML by serialising the given object

  • void ArrangeExpectedXml(object valueToSerialise, XmlRootAttribute xmlRootAttribute) - to arrange the expected XML by serialising the given object and applying the given XmlRootAttribute during the serialisation

  • void ArrangeExpectedXml(object valueToSerialise, XmlAttributeOverrides xmlAttributeOverrides) - to arrange the expected XML by serialising the given object and applying the given XmlAttributeOverrides during the serialisation

  • void ArrangeExpectedXml(string xmlValue) - to arrange the expected XML from the given XML string

  • virtual void AssertActualXmlEqualsExpectedXml() - to assert the actual XML against the expected XML

  • virtual void AssertActualXmlEqualsExpectedXml(IXmlFilter xmlFilter) - to assert the actual XML against the expected XML, ignoring items listed in the given IXmlFilter (see below)

  • bool IsEqual() - determines if the given actual and expected XML is equivalent

  • bool IsEqual(XNode expected, XNode actual) - determines if the given actual and expected XNode XML is equivalent

  • virtual bool IsEqual(XmlNode expected, XmlNode actual) - determines if the given actual and expected XmlNode XML is equivalent

Ignoring / Filtering XML Elements

The AssertActualXmlEqualsExpectedXml(IXmlFilter xmlFilter) override allows you to specify an IXmlFilter interface which allows you to specify a list of the local names of XML elements to ignore in comparisons, and/or a list of XPath expressions to ignore in comparisons.

Examples

For a quick example, please see the Behaviour Specification for the XmlTester class and the XML tester code

XML Filter

The XmlFilter class allows you to specify a list of the local names of XML elements to ignore in comparisons, and/or a list of XPath expressions to ignore in comparisons.

Two constructor methods allow you to easily specify these lists.

  • XmlFilter(IList<string> elementLocalNamesToIgnore)

  • XmlFilter(IList<string> elementLocalNamesToIgnore, IList<string> xpathsToIgnore)

XML Asserter

The XmlAsserter class provides utility methods for performing assertions on XML values. It has the following methods:

  • void XPathValueEquals(string description, string xpath, XNode rootElement, string expected) - to assert that the given XPath of the provided XNode has the given expected string value

  • void XPathValueEquals(string description, string xpath, XNode rootElement, XmlNamespaceManager namespaceManager, string expected) - uses the provided namespace manager to assert that the given XPath of the provided XNode has the given expected string value

  • void XPathValuesAreEqual(string description, string xpath, XNode expectedElements, XNode actualElements) - to assert that the value of the XPath in the given actual XNode equals the corresponding value in the given expected XNode

  • void XPathValuesAreEqual(string description, string expectedXpath, XNode expectedElements, string actualXpath, XNode actualElements) - to assert that the value of the actual XPath in the actual XNode is the same as the value of the expected XPath in the expected XNode

  • void XPathValuesAreEqual(string description, string expectedXpath, XNode expectedElements, XmlNamespaceManager expectedNamespaceManager, string actualXpath, XNode actualElements, XmlNamespaceManager actualNamespaceManager) - to assert that the value of the actual XPath in the actual XNode is the same as the value of the expected XPath in the expected XNode, using the provided XML namespace managers

  • void AreEqual(XElement expectedXml, XElement actualXml) - to assert that the given expected XElement is equivalent to the actual XElement

  • void AreEqual(XElement expectedXml, XElement actualXml, IXmlFilter xmlFilter) - to assert that the given expected XElement is equivalent to the actual XElement - using the given IXmlFilter

Mapping Testers

There are 4 map tester classes to be used depending on the type of input and output of your map:

The MappingFromXmlToXmlTester class has the following method overrides for arranging the input XML.

  • void ArrangeInputXml(Assembly assembly, string resourceName) - to arrange the input XML from an embedded resource in the given assembly

  • void ArrangeInputXml(XElement xmlElement) - to arrange the input XML from a given XElement

  • void ArrangeInputXml(object valueToSerialise) - to arrange the input XML by serialising the given object

  • void ArrangeInputXml(object valueToSerialise, XmlRootAttribute xmlRootAttribute) - to arrange the input XML by serialising the given object and applying the given XmlRootAttribute during the serialisation

  • void ArrangeInputXml(object valueToSerialise, XmlAttributeOverrides xmlAttributeOverrides) - to arrange the input XML by serialising the given object and applying the given XmlAttributeOverrides during the serialisation

  • void ArrangeInputXml(string xmlValue) - to arrange the input XML from the given XML string

  • void ArrangeExpectedOutputXml(Assembly assembly, string resourceName) - to arrange the expected output XML from an embedded resource in the given assembly

  • void ArrangeExpectedOutputXml(XElement xmlElement) - to arrange the expected output XML from a given XElement

  • void ArrangeExpectedOutputXml(object valueToSerialise) - to arrange the expected output XML by serialising the given object

  • void ArrangeExpectedOutputXml(object valueToSerialise, XmlRootAttribute xmlRootAttribute) - to arrange the expected output XML by serialising the given object and applying the given XmlRootAttribute during the serialisation

  • void ArrangeExpectedOutputXml(object valueToSerialise, XmlAttributeOverrides xmlAttributeOverrides) - to arrange the expected output XML by serialising the given object and applying the given XmlAttributeOverrides during the serialisation

  • void ArrangeExpectedOutputXml(string xmlValue) - to arrange the expected output XML from the given XML string

Input can be arranged from an embedded resource, XElement, object that is XML serialisable (for which you can also override the root XML namespace when serialised) or simply a string.

This same pattern is followed for arranging the expected output of the map, and for arranging the contents of flat files with the other map tester classes.

Assert - Compare the Actual Output Against the Expected Output

The MappingFromXmlToXmlTester class has the following method overrides for asserting the actual output from the map against the expected output that was arranged.

  • void AssertActualOutputXmlEqualsExpectedOutputXml()

  • AssertActualOutputXmlEqualsExpectedOutputXml(IXmlFilter xmlFilter) (see below)

All the comparison and logging and formatting of any differences is done for you. Easy!

Ignoring / Filtering XML Elements

The AssertActualOutputXmlEqualsExpectedOutputXml(IXmlFilter xmlFilter) override allows you to specify an IXmlFilter which allows you to specify a list of the local names of XML elements to ignore in comparisons, and/or a list of XPath expressions to ignore in comparisons.

Two constructor methods on XmlFilter allow you to easily specify these lists.

  • XmlFilter(IList<string> elementLocalNamesToIgnore)

  • XmlFilter(IList<string> elementLocalNamesToIgnore, IList<string> xpathsToIgnore)

Ignoring / Filtering Flat File Differences

Ignoring differences in flat files is a little more tricky, but not too difficult. The ChannelAdam library uses the DiffPlex library for performing text differences.

3 mechanisms on the flat file tester classes are provided for hooking into the DiffPaneModel difference result and manipulating it before a final decision is made as to whether or not the actual output is similar enough to the expected output.

  • An event that is raised with the differences
1    /// <summary>
2    /// Occurs when a text difference is detected, allowing a listener to filter the differences and
3    /// change the Line[x].Type to ChangeType.UnChanged so that the difference is no longer treated as a difference.
4    /// </summary>
5    /// <remarks>
6    /// This event or the TextDifferenceFilter property can be used for this purpose.
7    /// </remarks>
8    public event EventHandler<TextDifferenceDetectedEventArgs> TextDifferenceDetectedEvent;
  • An action delegate method that is called with the differences
1    /// <summary>
2    /// Gets or sets the Action delegate to be invoked when a text difference is detected, allowing differences to be filtered out by
3    /// changing the Line[x].Type to ChangeType.UnChanged - so that a difference is no longer treated as a difference.
4    /// </summary>
5    /// <value>The Action delegate.</value>
6    /// <remarks>
7    /// This property or TextDifferenceDetectedEvent can be used for this purpose.
8    /// </remarks>
9    public Action<DiffPaneModel> TextDifferenceFilter { get; set; }
  • A virtual method that allows you to inherit from the tester class and override the differences when they are detected.
1    protected virtual void OnTextDifferenceDetected(DiffPaneModel differences)

The ChannelAdam Test Framework Library for BizTalk

Overview

This is an open source .NET Framework 4.0, 4.5, 4.6 library providing functionality for the automated testing of BizTalk 2010/2013/2016 artifacts.

It provides you with an enhanced ability to use modern standard industry testing practices to test BizTalk Maps.

This library is compatible with the legacy, full .NET Framework 4.0 ChannelAdam Test Framework Libraries (version 1) only.

Please see the article Modern Testing of BizTalk Maps for background information on the issues with using Microsoft’s out-of-the-box functionality for testing Microsoft BizTalk Maps.

This library provides the following benefits and features:

  • Works with BizTalk 2010 / 2013 / 2016
  • Never again set the project property “Enable Unit Testing” to “True”!
  • BizTalk Map unit tests can be executed against a release build
  • The provided map tester classes allow you to easily unit test both XML and flat file BizTalk Maps
  • The design of tester classes follow the clean Arrange-Act-Assert (AAA) testing pattern
  • Support for arranging the input and expected output from a string, XElement, an XML serialisable object or loading from an embedded resource
  • Performs schema validation of both the input and output by default (easily overridable)
  • Support for mocking External Assembly class methods
  • Support for filtering assertions of the expected output to allow for dynamic data (such as timestamps or GUIDs)
  • Detailed information is provided allowing you to see the differences between the expected output and the actual output of the map.

The ChannelAdam Test Framework Libraries are fully compatible with MSTest (v1) and .NET Framework 4.0, 4.5, 4.6.

Note: I highly recommend using Behaviour-Driven Development practices and the usage of SpecFlow in conjunction with this library.

Getting Started

NuGet Package Installation

To install the ChannelAdam.TestFramework.BizTalk NuGet package run the following command in the Package Manager Console:

1PM> Install-Package ChannelAdam.TestFramework.BizTalk

Usage

The Basics

There are 4 map tester classes to be used depending on the type of input and output of your map:

  • BizTalkXmlToXmlMapTester - for testing a map that maps from XML to XML
  • BizTalkXmlToFlatFileMapTester - for testing a map that maps from XML to a flat file
  • BizTalkFlatFileToFlatFileMapTester - for testing a map that maps from a flat file to a flat file
  • BizTalkFlatFileToXmlMapTester - for testing a map that maps from a flat file to XML

Below is some sample MSTest test method code (in a very raw form) for testing a map that maps from XML to XML.

 1// ==================
 2// Variables
 3// ==================
 4
 5// Define some helpful variables for our testing artifacts
 6static Assembly thisAssembly = this.GetType().Assembly;
 7static string inputXmlTestDataEmbeddedResourceName          = thisAssembly.GetName().Name + ".InputXmlTestDataEmbeddedResource.xml"
 8static string expectedOutputXmlTestDataEmbeddedResourceName = thisAssembly.GetName().Name + ".ExpectedOutputXmlTestDataEmbeddedResource.xml"
 9
10// Create the MSTest compatible logging assertion class
11var logAssert = new ChannelAdam.TestFramework.MSTest.LogAssert();
12
13// Create the map tester - in this case for a map from XML to XML
14var xmlToXmlMapTester = new BizTalkXmlToXmlMapTester(logAssert);
15
16// ==================
17// Arrange
18// ==================
19
20// Arrange the input XML and expected output XML from embedded resources
21xmlToXmlMapTester.ArrangeInputXml(thisAssembly, inputXmlTestDataEmbeddedResourceName);
22xmlToXmlMapTester.ArrangeExpectedOutputXml(thisAssembly, expectedOutputXmlTestDataEmbeddedResourceName);
23
24// ==================
25// Act
26// ==================
27xmlToXmlMapTester.TestMap(new MySpiffyMapFromXmlToXml());
28
29// ==================
30// Assert
31// ==================
32xmlToXmlMapTester.AssertActualOutputXmlEqualsExpectedOutputXml();

Note: I highly recommend using the MoqTestFixture as a base class to your test class as it removes the need for you to be concerned with instantiating the LogAssert class and provdes a number of base methods to make testing easier. Please see the ChannelAdam Test Framework Libraries documentation for more information.

The test code above results in the following test output.

 110/10/16 10:00:00 PM - The input XML for the map is: 
 2<ns0:Request xmlns:ns0="http://SampleBizTalkMaps.Schemas.XmlRequest">
 3  <Key>Key_0</Key>
 4  <StringValue>StringValue_0</StringValue>
 5  <DateTimeValue>1999-05-31T13:20:00.000-05:00</DateTimeValue>
 6  <IntegerValue>100</IntegerValue>
 7  <DecimalValue>10.4</DecimalValue>
 8</ns0:Request>
 9
1010/10/16 10:00:00 PM - The expected output XML of the map is: 
11<ns0:Response xmlns:ns0="http://SampleBizTalkMaps.Schemas.XmlResponse">
12  <Key>Key_0</Key>
13  <StringValue>StringValue_0FAKE_GUID</StringValue>
14  <DateTimeValue>1999-05-31T13:20:00.000-05:00</DateTimeValue>
15  <IntegerValue>100</IntegerValue>
16  <DecimalValue>10.4</DecimalValue>
17</ns0:Response>
18
1910/10/16 10:00:00 PM - Validating the input XML for the BizTalk map
2010/10/16 10:00:00 PM - Executing the BizTalk map (XML to XML) MySpiffyMapFromXmlToXml
2110/10/16 10:00:00 PM - Asserting XML output from the BizTalk map exists is True
22
2310/10/16 10:00:00 PM - BizTalk map (XML to XML) execution completed
24
2510/10/16 10:00:00 PM - The actual output XML from the map is: 
26<ns0:Response xmlns:ns0="http://SampleBizTalkMaps.Schemas.XmlResponse">
27  <Key>Key_0</Key>
28  <StringValue>StringValue_0FAKE_GUID</StringValue>
29  <DateTimeValue>1999-05-31T13:20:00.000-05:00</DateTimeValue>
30  <IntegerValue>100</IntegerValue>
31  <DecimalValue>10.4</DecimalValue>
32</ns0:Response>
3310/10/16 10:00:00 PM - Validating the output XML from the BizTalk map
34
3510/10/16 10:00:00 PM - Asserting actual and expected XML are equal
3610/10/16 10:00:00 PM - Asserting The XML is as expected is True
3710/10/16 10:00:00 PM - The XML is as expected

And the test passed successfully!

Advanced Usage

More advanced functionality can be performed with the overloads on the methods used in the above test code.

Arrange - Input and Expected Output

The BizTalkXmlToXmlMapTester has the following method overrides for arranging the input XML.

  • void ArrangeInputXml(Assembly assembly, string resourceName) - to arrange the input XML from an embedded resource in the given assembly
  • void ArrangeInputXml(XElement xmlElement) - to arrange the input XML from a given XElement
  • void ArrangeInputXml(object valueToSerialise) - to arrange the input XML by serialising the given object
  • void ArrangeInputXml(object valueToSerialise, XmlRootAttribute xmlRootAttribute) - to arrange the input XML by serialising the given object and applying the given XmlRootAttribute during the serialisation
  • void ArrangeInputXml(object valueToSerialise, XmlAttributeOverrides xmlAttributeOverrides) - to arrange the input XML by serialising the given object and applying the given XmlAttributeOverrides during the serialisation
  • void ArrangeInputXml(string xmlValue) - to arrange the input XML from the given XML string

Input can be arranged from an embedded resource, XElement, object that is XML serialisable (for which you can also override the root XML namespace when serialised) or simply a string.

This same pattern is followed for arranging the expected output of the map, and for arranging the contents of flat files with the other map tester classes.

Act - Test the Map

The BizTalkXmlToXmlMapTester has the following method overrides for testing your BizTalk Map.

  • void TestMap(TransformBase map)
  • void TestMap(TransformBase map, IEnumerable<XsltExtensionObjectDescriptor> xsltExtensionObjectOverrides) (see below - Mocking External Assemblies)
  • void TestMap(TransformBase map, bool validateInputXml, bool validateOutputXml)
  • void TestMap(TransformBase map, IEnumerable<XsltExtensionObjectDescriptor> xsltExtensionObjectOverrides, bool validateInput, bool validateOutputXml)

The validateInputXml and validateOutputXml parameters are self-explanatory.

Mocking External Assemblies

The xsltExtensionObjectOverrides enumerable is the secret to mocking External Assembly class methods. To mock a class, create an Interface that define the method used in the map, and then create and set up a mock object from the Interface. Then use the following code to create the xsltExtensionObjectOverrides, populated with the mock object.

1// Mock the external assembly 'MyExternalAssemblyClassUsedInTheMap' class used in the map ;)
2var mocksOfExternalAssemblyClassesUsedInMap = new List<XsltExtensionObjectDescriptor>
3{
4    new XsltExtensionObjectDescriptor(typeof(MyExternalAssemblyClassUsedInTheMap), myMoqMockForThatClass.Object)
5};  

And test the map, providing the xsltExtensionObjectOverrides parameter.

1// Test the map which will execute methods on the mock objects
2xmlToXmlMapTester.TestMap(new MySpiffyMapFromXmlToXml(), mocksOfExternalAssemblyClassesUsedInMap);

For Other examples, including how to mock an External Assembly, please refer to this example BDD feature file and the implementation of the scenario steps.

Assert - Compare the Actual Output Against the Expected Output

The BizTalkXmlToXmlMapTester has the following method overrides for asserting the actual output from the map against the expected output that was arranged.

  • void AssertActualOutputXmlEqualsExpectedOutputXml()
  • AssertActualOutputXmlEqualsExpectedOutputXml(IXmlFilter xmlFilter)

All the comparison and logging and formatting of any differences is done for you. Easy!

Ignoring / Filtering XML Elements

The override allows you to specify an IXmlFilter which allows you to specify a list of the local names of XML elements to ignore in comparisons, and/or a list of XPath expressions to ignore in comparisons.

Two constructor methods on XmlFilter allow you to easily specify these lists.

  • XmlFilter(IList<string> elementLocalNamesToIgnore)
  • XmlFilter(IList<string> elementLocalNamesToIgnore, IList<string> xpathsToIgnore)

Ignoring / Filtering Flat File Differences

Ignoring differences in flat files is a little more tricky, but not too difficult. The ChannelAdam library uses the DiffPlex library for performing text differences.

3 mechanisms on the flat file tester classes are provided for hooking into the DiffPaneModel difference result and manipulating it before a final decision is made as to whether or not the actual output is similar enough to the expected output.

  • An event that is raised with the differences
1    /// <summary>
2    /// Occurs when a text difference is detected, allowing a listener to filter the differences and
3    /// change the Line[x].Type to ChangeType.UnChanged so that the difference is no longer treated as a difference.
4    /// </summary>
5    /// <remarks>
6    /// This event or the TextDifferenceFilter property can be used for this purpose.
7    /// </remarks>
8    public event EventHandler<TextDifferenceDetectedEventArgs> TextDifferenceDetectedEvent;
  • An action delegate method that is called with the differences
1    /// <summary>
2    /// Gets or sets the Action delegate to be invoked when a text difference is detected, allowing differences to be filtered out by
3    /// changing the Line[x].Type to ChangeType.UnChanged - so that a difference is no longer treated as a difference.
4    /// </summary>
5    /// <value>The Action delegate.</value>
6    /// <remarks>
7    /// This property or TextDifferenceDetectedEvent can be used for this purpose.
8    /// </remarks>
9    public Action<DiffPaneModel> TextDifferenceFilter { get; set; }
  • A virtual method that allows you to inherit from the tester class and override the differences when they are detected.
1    protected virtual void OnTextDifferenceDetected(DiffPaneModel differences)